Features

-High resistance, long life 1050W motor for the best performances in drilling and impact drilling

-Durable, strong 13mm keyed chuck secures maximum efficiency

-Metal gearbox enables heavy-duty applications and improves service life

-High impact rate for the best efficiency in impact drilling mode

-360° rotating ergonomic side handle minimizes vibration and enables continuous low-fatigue work

-2 speed functions competent for both high-speed and high-power applications

-Anti-dust switch for reducing dust penetration

-Variable speed control for working at customized speeds to suit various application materials

-Forward and reverse rotation functions

Motor & Gearbox

Ronix 2221 Impact Drill that delivers 1050W power for the best performance in drilling and impact drilling. So far, everything is quite similar with the performance of all power tools. But what makes a huge difference between 2221 and other tools in its level is the durable high-resistance full-metal gearbox. It enables our Ronix Impact Drill to deal with heavy-duty applications and improves service life.

Full-metal gearbox means minimum wear and tear, long-lasting performance and higher efficiency. All the gears and ball bearings are made and forged from high-quality alloy. The most important point about the gearbox is the 2-speed function. The first setting delivers maximum speed of 1200RPM but with higher power and the second setting brings maximum speed of 3200RPM with less torque. This mechanism enables Ronix 2221 to work competently with both high-speed and especially high-power modes which need more force in both drilling and impact drilling applications. This powerful gearbox with its high-quality metal-forged gears and housing allows you to put the desired amount of pressure to engage the bit to drill inside any kinds of masonry like concrete, bricks, blocks and stones.

This impact drill works in 2 modes, drilling and impact drilling. The dual-mode selector switch determines which mode to go with, rotation-only for drilling and hammer-drill for impact drilling. The mechanism of impact drilling function is very simple but the result is destructive and amazing inside any concrete, even with the highest level of density. By operating this mode, the teeth of two special gears around the shaft which are placed before the chuck engage and when the spinning starts, the spring between them will be compressed and released back and forth. Finally, the result will be 42000BPM of the maximum impact rate for Ronix 2221 Impact Drill.

Chuck

All the power and speed, resulted from the motor and gearbox, come to their final destination which is the chuck. As it was mentioned before, our 2221 Impact Drill delivers max drilling capacity of 40mm, 13mm and 16mm inside wood, steel and concrete. Nothing can handle this huge amount of torque, speed and capacity but a durable and strong 13mm keyed chuck which secures maximum efficiency.

Body

Ronix 2214K Drill Kit, 13mm, 750W is composed of lightweight materials to allow for a longer operating duration. This ergonomic small body design provides maximum power at minimum weight. The handle on the side of the drill kit has a 360° rotating ergonomic design that minimizes vibration and operator strain.

Switches

There are six anti-dust controllers designed on the body of Ronix 2221 Impact Drill, the dual-mode selector switch, the 2-speed settings switch, the lock-on button, the On/Off trigger, the dimmer switch and the forward/reverse function button. The dual mode selector enables the operator to work on applications with drilling and impact drilling functions. The 2-speed settings switch controls the 2 main functions of 2221 for both high-speed and high-power applications and is placed exactly on the gearbox. To have a continuous operation and reduce hand fatigue during a non-stop trigger hold, the lock-on button is exactly placed beside the trigger for better ergonomic use. The anti-dust trigger, which includes the dimmer switch inside itself, is ergonomically designed for reducing dust penetration. Finally, on top of the trigger, you can find the forward/reverse function button which causes the clockwise and counter clockwise rotation of the chuck.

Specification